Toolots GB4232 - Troubleshooting and Obviation; Saw Blade Breakage Issues

1
5
Ⅹ
Trouble Shooting and Obviation
NO.
ITEM
CAUSE
SWEEP MATHOD
1
Saw
blade
tooth
broken
1.Wheel edge cab the flange of saw
blade
Adjust the skateboard of
guide arm or tension
structure to set a gap
between saw blade back and
the wheel flange in running.
2. Irregular
Work piece shape
Adjust Profile to make the
contact surface as wide as
possible, so as to ensure
clamping firmly.
3. Saw overload
Reduce the feed speed
4. Saw blade loosen
Tension the saw blade
5.Chip accumulate in Guide Block
Remove and clean the Guide
Block
6. Improper Saw blade
Chose Saw blade according
to material of woe piece
7.Saw blade speed too slow
Accelerate the speed
8.Insufficient ubrication
Increased the quantity adjust
lubrication site
9Hydraulicoilshortage
Add Hydraulic oil 46#