Warning
1. Never exceed the scope and application of the machine.
2. Never use machine before reading the Instruction Manual.
3.The operator must be trained professionally, having capacity to complete various
operations safely and to prevent the injury and damage by improper operation for the
machine.
4.Users must strictly follow the instruction manual for the correct installation and the
operation; provide appropriate and clean operational areas without any prejudice to the
operator for the safe operation and routine maintenance.
5. The operator must be regulated by the Instruction Manual and training requirements
and do maintenance for machine periodically to ensure the safety.
6.The operator must have security guards working conditions and regularly checks their
integrity, never arbitrary remove security guards. If necessary, protection-boom should
be set up around the machine.
7. Defensive cover must be covered all before operation and adjust saw blade
transferable protection as close as possible to the work piece. Never open any
protective mask during operation.
8.Check the machine stopped before replacing Band Saw and the round cocoon
protective masks and check whether the support firmly reliable. Protective gloves must
be carried to guard against the pricks and hurting when disassemble saw blade.
9. During operation, any part of the body never contact with the band saws or enter the
processing zones, never restock the jammed or cut off work piece.
10.Never operate or maintain running machine with gloves or loose clothing .
11.Before sawing, must confirm the work piece is clamped firmly, and to ensure that
the work piece at clamping state during the whole process of sawing; Do not loose the
work piece until saw blade stopped.
12.Enough support should be provide to long and heavy materials’ merging and cutting
to avoid the work piece drop in cutting , that may lead the cutting machine overturning.
Use feed and access information planes when cutting longer material.
To Next Page
Loading...