8
Assembly instructions
(A). Slide the 14pcs weight
plate(35) along the guide rods (5)
from the top to the bottom.insert
the selector rod (19) into the hole
of weight plates.and then place
the weight selector(34) onto the
selector rod (19)
(B) Attach the foot plate (14) to the
front stabilizer(13), Secure them
with 2pcs M10*20 Allen bolt(92),
2pcsØ10 washer(100) and one
pc Foot plate tube(18).
.
Step 3
Make sure that all the grooves
face downwards and front.
To Next Page
Loading...
