2
f. Use the machine and accessories in accordance with these instructions and in the
manner intended for the particular type of machine, taking into account the working
conditions and the work to be performed. Use of the machine for operations different
from those intended could result in a hazardous situation.
5) Service
Have your machine serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the machine is maintained.
2. Specific Safety Rules
1)
Maintain labels and nameplates on the Inverter Machine. These carry important
safety information.
2) Avoid electric shock. Do not permit electrically live parts, cables, or electrodes to
contact skin, clothing, or gloves. Wear protective clothing. This unit draws enough
current to cause serious injury or death. Do not use the Machine unless you are
insulated from the ground and the work piece.
3) Avoid body damage. Arc rays and infrared radiation can injure e
yes and burn skin.
We
ar eye and body protection. Do not allow viewing by visitors without proper eye
and body protection. Use a Face Shield with arc shaded filter plate.
4) Move flammable and explosive materail at least 10 meters from the welding arc to
prevent sparks or molten metal from starting a fire. Keep a type ABC fire
extinguisher within easy reach. Thoroughly clean the object being welded of any
paint, grease, or other foreign material.
5) Avoid unintentional starting. P
repare to begin work before turning on the Inverter
Mac
hine.
6) Do not leave the Machine unattended when it is plugged into an electrical outlet.
Turn off the machine, and unplug it from its electrical outlet before leaving.
7) Use clamps or other practical ways to secure and support the work piece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to
loss of control.
8) This product is not a toy. Keep it out of reach of children.
9) People with
pacemakers should consult their physician(
s) before using.
Electromagnetic fields in close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In addition, people with pacemakers
should:
• Avoid operating alone.
• Do not use with Power Switch locked on.
• Properly maintain and inspect to avoid electrical shock.
• Any Power Cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI)
should also be implemented – it prevents sustained electrical shock.
10) Prevent eye injury and burns. Wearing and using personal safet y clothing and safety
devices reduce the risk for injury.
• Wear safety impact eye goggles underneath welding eye protection featuring at least
a Number 10 shade lens rating.
• Leather leggings, fire resistant shoes or boots should be worn when using this
product. Do not wear pants with cuff
s, shirts with open pockets, or any clothing that c
an
catch and hold molten metal or sparks.
To Next Page
Loading...