23
rigging the spinnaker kit (...)
The halyard can now be fed through the spinnaker sock
(it is easier to reach down the sock if it is not attached to the
pole of the boat).
When you have pulled the halyard our of the bag mouth tie
13
The rear of the sock can now be secured by with the lines
attached to the loops, one side ties around the mast foot
and the other ties around the beam passing through the
eyelet on the trampoline. These do not need to be pulled
tight as they are only there to support the sock. Also the
sock will move while sailing so you need to allow for that to
take place.
14
To Next Page
Loading...
