4.10 Abbreviated dialling keys
You can store 3 direct abbreviated numbers M1, M2 and M3 (each up
to 24 digits) in the base station.
Saving direct abbreviated dialling numbers (M1 - M2 - M3)
Dialling an abbreviated number
4.11 Setting the internal / external ring tone
There are 9 different ring tones available (1 - 9).
4
Select
"DELETE ENTRY"
or
"DELETE ALL"
and
confirm.
5
Press OK to confirm or press the Escape key to go
back.
M1-M2-M3
1 Press one of the abbreviated dialling keys.
2
Press OK.
3
Select
"NEW ENTRY"
and confirm.
4
Enter the name and confirm.
5
Enter the telephone number and confirm.
A confirmation tone is now sounded.
Info To save a pause in the telephone number, press the
pause key 'P' (key 26 in figure 3F „Base station“ on
page 12) for 2 seconds at the place where you want
to inserted a 3 -second pause.
Abbreviated dialling numbers can be edited or
deleted in the same way described for the phone
book above.
Unassigned abbreviated dialling keys are displayed
as
"
EMPTY
"
.
1 Lift the receiver or press the hands free key.
M1-M2-M3
2
Press the abbreviated dialling key.
The telephone number is automatically dialled.
3
Hang up the receiver or press the hands free key
again to end the call.
1 Press the Menu / OK key.
2
Select
"RING TONE"
and confirm.
To Next Page
Loading...
