Topcom SOLOGIC B901 COMBO - Call forwarding and internal calls; Call forwarding and conference calls during an external call; Internal call (house phone function)

34
Call forwarding and internal calls
7 Call forwarding and internal calls from one handset
to another
7.1 Call forwarding and conference calls during an
external call
7.2 Internal call (house phone function)
Important For the base and the handset to be able to
communicate, the handset must be registered to
that base.
INT
1 During an external call, press the INT key and then
the number of the handset (1-5, select "0" for the
base station).
The other handset will ring.
If the call was set up with the other handset, you can
talk internally. When you hang up, the external call
will be forwarded to the other handset.
INT
2 Hold down the INT key for 3 seconds. You can now
talk to the second handset and the external call at
the same time (conference call).
INT
3 Press the INT key again to switch back to the
external call.
4 Press the hang up key to end the call.
Info You can conduct a call between the base station and
the cordless handset.
The base station has the internal number "0".
INT
1 In standby mode, press the INT key and then the
number of the handset (1-5, select "0" for the base
station).
The handset or base station you have called will now
ring.
2 Press the call key or pick up the receiver on the
base station.
You can now talk internally.
5
J
K
L
6
M
N
O
4
G
H
I
5
J
K
L
6
M
N
O
4
G
H
I