Need help?Do you have a question about the Topcon AT-G4 and is the answer not in the manual?
General| Type | Automatic Level |
|---|---|
| Water Resistance | Yes |
| Compensator Range | ±15' |
| Circular Level Sensitivity | 10'/2 mm |
| Stadia Multiplication Constant | 100 |
| Stadia Addition Constant | 0 |
| Operating Temperature Range | -20°C to +50°C |
| Water and Dust Protection | IPX6 |
| Compensator Setting Accuracy | 0.5" |
Detailed steps for correctly setting up the tripod for instrument use.
Instructions for securely mounting the auto-level onto the tripod head.
Procedures for precisely positioning the instrument directly above a survey point using a plumb bob.
Guide to properly centering the instrument's circular level bubble using leveling screws.
Steps to adjust the telescope eyepiece for clear viewing of cross-hairs and target.
Instructions for aiming at a target and achieving a sharp focus using the instrument.
Using the auto-level to determine elevation differences between points with a leveling rod.
Procedures for measuring horizontal angles using the instrument's graduated horizontal circle.
Method for measuring distances using stadia hairs on the instrument and a graduated rod.
Steps to correct the circular level bubble's centering after telescope rotation.
Procedure to ensure the horizontal line of sight is parallel to the telescope's axis.
To Next Page
