Need help?Do you have a question about the Topcon GTS-230N and is the answer not in the manual?
General| Type | Total Station |
|---|---|
| Magnification | 30x |
| Operating Temperature Range | -20°C to +50°C |
| Distance Range with Reflector | 3, 000 m |
| Distance Range Reflectorless | 200 m |
| Display | LCD |
| Compensator | Dual-axis |
| Distance Measurement Accuracy | ±(2 mm + 2 ppm) |
Guidelines for safe and proper handling of the instrument.
Warnings and safety guidelines for instrument use and maintenance.
Information on laser safety standards and warnings.
Step-by-step guide for setting up the instrument on a tripod.
Procedure for measuring horizontal and vertical angles.
Procedures for inputting or setting the instrument's occupied point.
Steps for performing coordinate measurements and viewing results.
Introduction to various application programs like REM and MLM.
Procedures for calculating area from coordinate files or measured data.
General operation for initiating and managing data collection.
Steps for executing layout operations using point data.
Inputting the prism constant for accurate distance measurements.
Procedures for setting temperature and pressure values for correction.
Guidelines for proper battery charging and storage to maintain performance.
Method for checking and adjusting the instrument's constant value.
To Next Page