EasyManua.ls Logo

Topcon GTS-239W User Manual

Topcon GTS-239W
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ELECTRONIC TOTAL STATION
GTS-230W
SERIES
GTS-233W
GTS-235W
GTS-236W
INSTRUCTION MANUAL
GTS-239W

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Topcon GTS-239W and is the answer not in the manual?

Topcon GTS-239W Specifications

General IconGeneral
BrandTopcon
ModelGTS-239W
CategoryMeasuring Instruments
LanguageEnglish

Summary

FOREWORD

Safety Cautions

Lists critical safety warnings and precautions to prevent injury or damage during instrument use.

1 NOMENCLATURE AND FUNCTIONS

1.1 Nomenclature

Identifies and labels the main external parts of the total station for user familiarity.

2 PREPARATION FOR MEASUREMENT

2.1 Power Connection

Provides instructions for connecting the instrument's power source, including batteries and chargers.

2.2 Setting Instrument Up For Measurement

Guides users on how to properly set up, level, and center the instrument on a tripod.

3 ANGLE MEASUREMENT

3.1 Measuring Horizontal Angle Right and Vertical Angle

Step-by-step instructions for measuring horizontal and vertical angles accurately.

4 DISTANCE MEASUREMENT

4.1 Setting of the Atmospheric Correction

Guides on setting atmospheric correction values for accurate distance measurements based on environment.

4.2 Setting of the Correction for Prism Constant

Explains how to set the prism constant for accurate distance measurements with different prisms.

4.3 Distance Measurement (Continuous Measurement)

Step-by-step instructions for performing continuous distance measurements.

5 COORDINATE MEASUREMENT

5.1 Setting Coordinate Values of Occupied Point

Explains how to input the instrument's occupied point coordinates for subsequent calculations.

5.2 Setting Height of the Instrument

Details how to set the instrument height for accurate coordinate measurements.

5.3 Setting Height of Target (Prism Height)

Explains how to set the prism height for accurate coordinate measurements.

5.4 Execution of Coordinate Measuring

Step-by-step guide to executing coordinate measurements using instrument and prism heights.

6 SPECIAL MODE (Menu Mode)

7 DATA COLLECTION

7.1.1 Selecting a File for Data Collection

Guides on selecting or creating a file for storing collected data before starting measurements.

7.1.3 Occupied Point and Backsight Point

Details methods for setting occupied and backsight points for accurate data collection.

7.2 Operational Procedure of “DATA COLLECT”

Provides detailed steps for performing data collection operations and managing collected data.

8 LAYOUT

8.1.3 Setting Occupied Point

Explains methods for setting the occupied point coordinates for layout operations.

8.1.4 Setting Backsight Point

Details the methods for setting the backsight point for layout operations.

8.2 Executing a Layout

Step-by-step guide to executing layout tasks using points from memory or direct input.

9 MEMORY MANAGER MODE

12 SETTING ATMOSPHERIC CORRECTION

14 POWER SOURCE AND CHARGING

14.1 On-board Battery BT-52QA

Covers the removal, charging, and refreshing of the on-board battery for continuous operation.

16 SELECTING MODE

17 CHECK AND ADJUSTMENT

17.1 Checking and adjusting of instrument constant

Explains how to check and adjust the instrument's constant for accurate measurements.

20 BATTERY SYSTEM

BT-52QA

Details the on-board battery, its charging, and operation time specifications.

BT-3L

Describes the large capacity external battery pack and its charging specifications.

Related product manuals