14
Auto-leveling lamp
Flashing :
Auto-leveling is in process. When automatic leveling is almost complete, the
flashing rate will be slow. The head will not rotate and the laser beam will not
emit during the auto-leveling process.
ON Solid:
Auto-leveling is complete.
The rotary head is active and emits the laser beam.
To turn automatic leveling off
To turn OFF the auto-leveling function (manual mode), press the Auto/Manual leveling con-
trol pad twice in quick succession. The manual mode indicator light will illuminate. The instru-
ment can be positioned in any direction and the laser beam remains on and the head will
rotate.
IMPORTANT
: In manual mode, the laser beam will not shut off if disturbed! To return to Auto-
leveling mode, press Auto/Manual control pad once.
To Next Page
Loading...
