51
SPECIFICATIONS AND PERFORMANCE
SYSTEM CLASSIFICATION
• Types of protection against electric shocks:
This instrument is classified as Class I equipment.
Class I equipment does not depend only on basic insulation for protection against electric
shocks, but also provides a means of connection to a protective earth system of facilities so
that metal parts that come into contact do not become conductive while the basic insulation is
in failure.
• Degree of protection against electric shocks: Type B applied part
Type B applied part is the applied part complying with the specified requirements of the Stan-
dard IEC 60601-1 to provide protection against electric shock, particularly regarding allow-
able LEAKAGE CURRENT.
• Degree of protection against harmful ingress of water: IPx0
The TRC-50DX has no protection against ingress of water. (The degree of protection against
harmful ingress of water defined in IEC 60529 is IPx0.)
• Classification according to the method(s) of sterilization or disinfection recommended by the
manufacturer: not applicable.
The TRC-50DX has no part to be sterilized or to be disinfected.
• Classification according to the degree of safety of application in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide: Equipment not suitable for use in
the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
The TRC-50DX should be used in environments where no flammable anesthetics and/or
flammable gases are present.
• Classification according to the mode of operation: Continuous operation.
Continuous operation is the operation under normal load for an unlimited period, without the
specified limits of temperature being exceeded.
DIMENSIONS AND WEIGHT
Dimensions : 340mm (W) × 505mm (D) × 506~715mm (H)
Weight : 35kg (only the instrument)
PURPOSE OF USE
To observe, take pictures or record pictures of the posterior segment of the eye through the
pupil.
To Next Page
Loading...