How to troubleshoot a Topcon Monitor VisiChart that has no power?
If your Topcon Monitor VisiChart has no power and isn't functioning, check if it's properly connected to a live AC power source. Also, inspect the cabling for any signs of damage.
What to do if Topcon Monitor VisiChart is on but does nothing?
If your Topcon Monitor VisiChart is on but the screen is black and the remote control isn't working, try these steps: First, unplug and then re-plug the IR sensor. Next, check the batteries in the remote control. Finally, try restarting the system by pressing the power button.
What to do if Topcon Monitor VisiChart has an error during start-up?
If your Topcon Monitor VisiChart starts but encounters an error before displaying a chart, try restarting the system by pressing the power button. If the issue persists, further assistance is needed.
How to fix a 'keyboard not found' error on a Topcon Monitor VisiChart?
If your Topcon Monitor VisiChart displays a “keyboard not found” error during startup, ensure the IR sensor is firmly plugged into a USB port. Then, restart the system by pressing the power button. If the issue persists, further assistance is needed.
General| Manufacturer | Topcon |
|---|---|
| Model | VisiChart |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Display Size | 24 inches |
| Input Connectors | HDMI, DVI |
| Power Consumption | 30 W |
| Weight | 5.5 kg |
Specifies direct mounting of the VisiChart for patient viewing, including height and distance recommendations.
Details mirrored mounting of the VisiChart for increased refraction distance, including height and position.
Provides recommendations for electrical outlet placement and connection for the VisiChart.
Instructions for connecting and positioning the remote control sensor for optimal performance.
Lists the various visual acuity charts supported by the VisiChart system.
Details isolation options available for visual acuity testing, such as lines and single characters.
Highlights extra functionalities like red/green duochrome, fixation dots, and contrast settings.
Guides through initial screen setup, including distance, position, and display settings.
Details how to adjust monitor settings for width and height, typically for a 10x10 cm square.
Explains how to configure optotype sizes, lines, characters, and randomization for charts.
Describes how to create custom test sequences by selecting chart size, type, and function.
To Next Page