14 15
EN
3) Press “ENTER” to conduct a “Ripple Test”:
4) Press “ENTER” again, or wait for a few seconds for “Charging Test” to
initiate:
5) The screen will display instructions for the technician to press vehicle
accelerator to increase RPM to 2500r/min and maintain 2500 r/min for 5
seconds. Press “ENTER” to display the test result:
Battery Voltage Engine PerformanceStatus
13.4V~14.6V Normal
13.2V~13.4V Attention
<13.2V Inspection ASAP
Headlamps & A/C ON
(Depress Accelerator)
Reference Table (for 12V battery)
To Next Page
