Topeak FlashStand - User Manual

Need help?

Do you have a question about the Topeak FlashStand and is the answer not in the manual?

Summary

FlashStand Assembly Guide

Initial Assembly Steps

Instructions for the initial assembly of the FlashStand components.

Hook Installation Verification

Ensure the hook is installed correctly to prevent arm damage.

Stand Deployment Procedure

Steps for deploying the tripod legs of the FlashStand.

Bike Type Configuration

Adjusting the stand for 700c road bikes or 26" mountain bikes.

FlashStand Installation

Attaching Stand to Bike

Procedure for attaching the FlashStand to the bicycle frame.

Mounting Bike on Stand

Steps for safely mounting the bicycle onto the assembled FlashStand.

Weight Limitation Warning

Crucial warning regarding the maximum weight capacity of the FlashStand.

Important Warnings and Usage

Avoid Weight on Bike

Never place weight on the bicycle while it is mounted on the stand.

Wheel Spinning and Braking Caution

Avoid spinning the rear wheel at high speeds or sudden braking.

Bike Compatibility and Limitations

Information on bike types and frame obstructions the stand is not designed for.

Weight and Surface Use Restrictions

Maximum weight capacity and surface use restrictions for the FlashStand.

Limited Warranty Information

Details on the 2-year warranty and claim requirements.

Summary

FlashStand Assembly Guide

Initial Assembly Steps

Instructions for the initial assembly of the FlashStand components.

Hook Installation Verification

Ensure the hook is installed correctly to prevent arm damage.

Stand Deployment Procedure

Steps for deploying the tripod legs of the FlashStand.

Bike Type Configuration

Adjusting the stand for 700c road bikes or 26" mountain bikes.

FlashStand Installation

Attaching Stand to Bike

Procedure for attaching the FlashStand to the bicycle frame.

Mounting Bike on Stand

Steps for safely mounting the bicycle onto the assembled FlashStand.

Weight Limitation Warning

Crucial warning regarding the maximum weight capacity of the FlashStand.

Important Warnings and Usage

Avoid Weight on Bike

Never place weight on the bicycle while it is mounted on the stand.

Wheel Spinning and Braking Caution

Avoid spinning the rear wheel at high speeds or sudden braking.

Bike Compatibility and Limitations

Information on bike types and frame obstructions the stand is not designed for.

Weight and Surface Use Restrictions

Maximum weight capacity and surface use restrictions for the FlashStand.

Limited Warranty Information

Details on the 2-year warranty and claim requirements.

Overview

Function Description
Important Technical Specifications
Usage Features
Assembly and Setup
Installation on a Bicycle
Important Usage Warnings and Recommendations
Maintenance Features
Warranty Information

The Topeak FlashStand is a portable bicycle stand designed for supporting and maintaining bicycles. It offers a convenient solution for repairs, storage, and display, particularly for road bikes and certain mountain bikes.

Function Description:

The FlashStand's primary function is to provide a stable platform for a bicycle, allowing for various maintenance tasks such as cleaning, minor adjustments, and drivetrain work. It is designed to be compact and easily foldable for portability and storage. The stand supports the bicycle by engaging with the crank arm and the bottom bracket area, lifting the rear wheel off the ground.

Important Technical Specifications:

Maximum Loading Weight Limitation: The FlashStand is designed to support a maximum bike weight of 14 kgs (30.8 lbs). Exceeding this limit can damage the stand.
Compatibility:
- Road Bikes: Compatible with 700c road bikes.
- Mountain Bikes: Compatible with 26" mountain bikes, provided the tires are not larger than 26" x 2.25".
- Bottom Bracket Clearance: The stand is designed for bikes without obstructions on the downtube at 110mm to 140mm from the bottom bracket center. This means bikes with shock mounts, water bottle mounts/cages, or other similar obstructions in this area may not be compatible.
- Shifter Compatibility: Not designed for bikes using Shimano Nexave series shifters.
Dimensions (approximate for compatibility): The manual indicates a BB center to downtube clearance requirement of 110mm to 140mm.

Usage Features:

Assembly and Setup:

Unfolding the Stand: The stand unfolds from a compact state. The arm, which includes the hook, pivots upwards.
Hook Installation: Ensure the hook is installed correctly on the arm. Incorrect installation can lead to damage. The manual provides visual cues for correct ("YES") and incorrect ("NO") hook positioning.
Arm Adjustment: The arm can be adjusted to the desired angle.
Leg Deployment: The legs of the stand unfold to create a stable tripod base.
Bike Type Specific Adjustment:
- For 700c Road Bikes: The stand is used in a specific configuration.
- For 26" Mountain Bikes: The stand requires a slight adjustment. A knob on the stand needs to be loosened to allow for a different angle or extension, then tightened to secure the position suitable for mountain bikes.

Installation on a Bicycle:

Positioning the Stand: The stand is placed on the ground next to the bicycle.
Engaging the Crank Arm: The hook of the FlashStand is designed to engage with the bicycle's crank arm.
Lifting the Bike: The stand is then used to lift the rear wheel of the bicycle off the ground, providing stability for maintenance.
Stability Check: Ensure the bike is securely seated on the stand and stable before performing any work.

Important Usage Warnings and Recommendations:

Weight Distribution: Never put additional weight on the bike when it is installed on the FlashStand, as this can damage the arm.
Wheel Spinning: Avoid spinning the rear wheel at high revolutions or applying the rear brake to a fast-spinning wheel while the bike is on the stand. The forces generated can damage the FlashStand.
Handlebar Hold: For added stability when rotating pedals, it is recommended to hold the handlebar with one hand.
Surface Recommendation: Not recommended for use on grass, loose dirt, gravel, or uneven surfaces, as these can compromise the stand's stability.
Storage: The FlashStand is designed for easy folding and compact storage when not in use.

Maintenance Features:

Bolt Tightening: Periodically check and tighten any loose bolts on the FlashStand. However, avoid over-tightening to the point where the stand becomes difficult to unfold or adjust.
Cleaning: Keep the stand clean from dirt and debris to ensure smooth operation and longevity.

Warranty Information:

Limited Warranty: The FlashStand comes with a 2-year warranty covering all mechanical components against manufacturer defects.
Warranty Claim Requirements: To claim warranty service, the original sales receipt is required. Without a sales receipt, the warranty period is assumed to begin from the date of manufacture.
Voided Warranty: The warranty is void if the FlashStand is damaged due to user abuse, overload, system alteration, modification, or use in any way not intended as described in the user's guide.

The FlashStand is a practical tool for cyclists who need a portable and reliable way to support their bikes for maintenance or display, emphasizing ease of use and compact design while requiring adherence to specific weight and compatibility guidelines.