for 6 sec
to return to COMPUTER
MODE after riding.
for
6 sec to switch.
( 3 sec to clear
and reset all data)
for 6 sec
to return to COMPUTER
MODE.
On computer for 6 sec to enter REMOTE
MONITOR MODE.
to enter each setting mode. to change digit. to next selection.
Keep following the & processes for the remaining settings then to confirm .
Follow the procedure in each section to set up your computer:
GB
PANOCOMPUTER WIRELESS
User's Guide
ĸč
ĸƦĀ
ĸċč
PanoComputer Mount
(Fits ø 31.8 mm Handlebar only)
Bolt
SET ButtonRESET Button
MODE Button
Press Press and Hold
RY
REQUIRED ACCESSORIES
HOW TO SET UP YOUR PANOCOMPUTER
HOW TO OPERATE IN SECOND MONITOR MODE (SECOND MONITOR function) (Using English version as an example)
6 sec
Data syncs with computer
Start riding...
Ʀč
Tap II to stop and save ride
data to your smart device.
1 sec: select digit
3 sec: go to next section
/ setting mode
6 sec: switch COMPUTER
MODE and REMOTE
MONITOR MODE
OPTION A
[
COMPUTER MODE
]
|
Ʀ
Turn the crankarm counterclockwise.
When "1" appears, the Speed & Cadence
Sensor pairing is successful.
Note: Bike B will indicate "2".
Wear the Heart Rate Monitor on your chest.
When "1" appears, the pairing is successful.
Note: Bike B will indicate "2".
3 sec 3 sec
BIKE A.B Date 12/ 24h clock km/ m ODO
Wheel Circumference
Pairing Speed & Cadence
Sensor + Heart Rate Monitor
ćĈćĈ
If no button is touched for 10 seconds,
the screen will switch to Screen 1
automatically.
Screen 1 Screen 2 Screen 3
3 sec
3 sec
to save
ride data
to check the
ride data just
saved
ćĈ
ą
+
Ride data is transmitted
to computer from smart
device. Smart device
screen can be turned off
to save battery.
OPTION B
[
REMOTE MONITOR MODE
]
| (Using English version as an example)
Open PanoBike App in your smart device then
tap “ ” icon.
6 sec
Tap "Setup" button to pair smart device with computer.
Choose desired time and unit format. Insert power zones
and wheel size setting. Tap "Save" to complete.
ąč
Ķķ
Sensors transmit ride data to
and displays ride data on
computer. Smart device screen
is turned off to save battery.
[]
Sensors transmit ride
data to computer directly.
After riding, data can be
transferred to PanoBike
App on your smart device.
[]
1
2 3 4
On computer for 6 sec to enter REMOTE MONITOR MODE.
Open Topeak PanoBike App. Tap "START RIDE", then tap "START" to record your ride.
1
2 3
PanoBike Speed &
Cadence Sensor
PanoBike Heart
Rate Monitor
Art No. TPB-HRM01 Art No. TPB-CS01
ČBluetooth® Ʀč
After pairing, if you want to check the
connection of Heart Rate Monitor in
non-riding status, turn the crank and
connect Speed & Cadence Sensor first.
To Next Page
Need help?
General
