Topeak DeFender M1 - User Manual

R
(Rear)
R
(Rear)
F
(Front)
F
(Front)
DeFender M1
Tool required: 4 mm Allen key
Recommended Torque
2-4 Nm (17-35 in. lbs)
4mm
Allen key
Press to
install / release
Press to
install / release
Fits ø19.6 - ø26 mm
DeFender M1 fits most standard
front forks. However, it will not
fit forks with a crown thickness
over 60 mm (2.36") and is not
designed to be used with the 1.5"
headset standard.
Fits ø 27.7~ ø35 mm
GB
User's Guide
DeFender M1 / M2
Prepare to Ride
CAUTION :
When installing DeFender M1 with
suspension forks, make sure no part of
the fork comes in contact with the
DeFender M1 during its travel length.
Otherwise damage to your bike or
DeFender M1 may occur and it may also
cause bodily injury.
Back viewBack view
DeFender M1
IMPORTANT NOTES
Fits ø 27.7~ ø35 mmFits ø19.6 ~ ø26 mm
Wedge
Set
thickness 60 mm
thickness 60 mm

Summary

DeFender M1 Installation

Installation Procedure

Shows how to attach the fender using the required tool and recommended torque.

Compatibility and Fit

Details the fork diameter and thickness requirements for proper mounting.

Important Notes and Cautions

Highlights potential damage and specific headset standards to avoid.

DeFender M2 Installation and Use

Slip Joint Clamp Compatibility

Details the handlebar diameter ranges for the slip joint clamp.

Angle Adjustment

Explains how to adjust the fender angle and critical warnings about adjustment.

Warranty Information

Outlines the 2-year warranty, claim requirements, and void conditions.

Topeak DeFender M1 Specifications

General

Type	Fender
Product color	Black, Silver
Surface coloration	Monochromatic
Compatible wheel size (max)	26 \

Weight and Dimensions

Depth	115 mm
Width	570 mm
Height	85 mm
Weight	190 g