7.1 Recording a programme 33
back into standby mode again in one minute. However, if you
press any button on the remote control or on the front panel
even just one time, the digital receiver will not switch into
standby mode.
To add a timer recording, select
Reservation > Reservation
menu, then the timer list will be displayed.
To add a new timer event, press the
button, and a box
for options will appear.
Take the following steps:
1. Set the option as you desire.
- Once : record one time only
- Daily : record everyday
do not record
2. Select the service type.
- Channel :
- Record :
3. Set the
4. Set the Date option to a desired date, on which the digital
receiver will turn on.
The date format is day/month/yearday of the week.
5. Set the Start Time option to a desired time, at which the
recording will be started. The time format is hour: minute.
6. Set the Duration option to a desired time, in which the
7. To set a recording reservation with the above settings,
select the Save item; otherwise, it will not be saved and
will not occur.
Channel option to the service which provides the
programme you want. Pressing the
button on this
option displays a services list, from which you can select
your desired service.
To Next Page
