Set up
If your TV is made by Philips then your remote control is
For other brand TV, follow one of the settings listed.
1. Key in TV code
1) Turn on your TV.
2) Find your TV code from TV Code List in manual.
3) Press TV button on your remote control.
4) Hold down OK and the Red key together for about
twice.
5) Key in the 4-digit TV code of your TV. The light on your
check you’ve got the right code
The settings are done and your remote control should now work with your TV.
and enter it again from step 3).
2. Search TV code by Brand code
2) Find your TV Brand Code from list in manual.
3) Press TV button on your remote control.
4) Hold down OK and the Red key together for about
5) Press TV again.
3. Auto search TV code
2) Press TV button on your remote control.
3) Hold down OK and the Red key together for about
4) Press POWER again, the LED will be turned on and start to search.
The remote will transmit a code of [POWER] button per 1.5 seconds automatically to the TV,
5) As the code is found, the TV will be turned OFF and back ON.
6) Now press the OK button to save.
To Next Page
