3.8
INSTALLING THE DOOR BLOCK
Right door front carriage
Door block with manual
release incorporated
Front carriage
Front carriage
Door block with manual
release incorporated
Door block with manual
release incorporated
2 DOOR PANELS
1 RIGHT DOOR PANEL
1 LEFT DOOR PANEL
Carriage block fastener
Manual release
Carriage block fastener
Fastening screw
During installation, make sure that when the door is closed with the block on, it must be possible to open the door manually
by at least 2-3 mm. This tolerance is necessary to enable the block to be released without difficulty.
Fig.
27
Fig.
28
Fig.
29
Fig.
30
To release and open the door, push the manual release
lever under the casing forward and, at the same time, pull
the door with your hand until it opens.
Fig.
31
20
INSTRUCTIONS FOR INSTALLATION AND USE
EN
K140
To Next Page
Loading...