TOPP K140 - Error and Warning Codes List

5.7
LIST OF ERRORS AND WARNING
Display
code 7
segments
Malfunction of the motor driver.
The encoder is not functioning properly.
Battery malfunction.
Safety external sensor malfunction.
Safety internal sensor malfunction.
Lateral sensor 1 malfunction.
Lateral sensor 2 malfunction.
Antipanic sensor malfunction.
Motor poles inverted. Reverse the cables.
First startup signal. The learning/reset procedure is necessary.
Description
Bus voltage low.
Obstacle not removed. Check for obstacles or friction.
Code-error list
( switch)
A
B
C
D
E
F
G
h
I
J
K
L
Doors free.
M
n
Bus voltage high.
P
Motor bridge voltage high.
Time out (120s) during the learning/reset procedure.
o
47
EN
K140
INSTRUCTIONS FOR INSTALLATION AND USE