Topten TK108 - Automatic Photo Capture; Other SMS Commands

TK108 GPS Vehicle Tracker
User Manual
Other SMS Command List
Note: ****** is user’s password and the default password is 111111. The
tracker will only accept commands with the correct password.
Page 9
Set to take photos automatically by time intervals
SMS command:
111111CAM:X
X can set 0 - 65535 the unit is minute.
(if you want to cancel the function about taking photo automatically, then just
set the X with 0)
The photo only can send to the platform, can’t send to phone.
Functions
SMS Command
Example
Movement Alarm
******MOV:X
111111MOV:500
X: X is the radius of the fence. default setting is 500 meters
=0: close the movement alarm (when tracker is armed, it will be activated automatically.)
Example: it is set the radius of movement alarm as 500meters.
Set the Shock Sensor
******SHK:X
111111SHK:3
It is to set the sensitivity of the shock sensor. X=1~5. (X=1,less sensitive; X=5, most
sensitive; default X=2).
Clear the Parameters
******CLR
111111CLR
Remarks: it will reset all the parameters to the default settings.
Reboot the Tracker
******STR
111111STR
It will reboot the tracker immediately.