V RFID Car Alarm Functions and How to use
It is the optional function, the extra RFID reader module & tag are needed.
It supports 2.4G long distance reader/reader module(3-8meters);
Our active RFID reader module & RFID tag are designed with 2.4G wireless
technology. The working distance is from 3-8 meters, our active RFID tag has very low
power consumption & its battery can work for more than 1 year.
It is not only used for driver ID identification, but also as a key to arm/disarm the
vehicle automatically.
2.4G Reader module 2.4G tag
RFID Reader
The RFID reader module is placed inside the box of the tracker.
RFID Tag
Please press the power switch on the tag & hold it for 3 seconds, if the LED light
changes from ON to flash, it means the tag is power ON; if the LED light change from
ON to OFF, it means the tag is power OFF.
Each tag has a unique 6-digits ID on the sticker.
It is the long-distance active RFID tag, the battery of the tag can work for more
than 1 year. User can change the tag's battery easily once finished.
Activate/Deactivate RFID Function
The following SMS commands are used to turn ON/ OFF the RFID function:
111111RFD:6:1 : Activate the RFID function (Default setting)
To Next Page
Loading...
