111111RFD:6:0 : Deactivate the RFID function
Arm/Disarm by RFID Tag
The following SMS command is used to turn ON/ OFF the RFID's arm/disarm function:
111111RFD:8:1 : Activate the RFID's arm/disarm function (Default setting)
111111RFD:8:0 : Deactivate the RFID's arm/disarm function
Once this function is activated, only the authorized tags can be used to arm/disarm
the system.
Autorize the RFID Tags to Arm/Disarm
The SMS command is used to authorize maximum 20 RFID tags:
111111TAG:XX:YYYYYY, (with , at the end)
XX: 01 ~20 , it is the sequence of the authorized RFID tag
YYYYYY: it is the ID no. of the RFID tag (6 digits, pasted on sticker of tag)
Example: The following command is to authorize the tag #234601 & tag#234602 to
arm/disarm.
111111TAG:01:234601,02:234602,
To remove the 2nd stored tag: 111111tag:02:000000, (with , at the end)
To check the 00-10 stored tag: 111111tag: (with : at the end)
To check the 11-20 stored tag: 111111tag:11
TK108 GPS Vehicle Tracker
To Next Page
Loading...
