TK108 GPS Vehicle Tracker
Restore the Stopped Car to Normal Status
SMS command: 111111RES (or 111111res)
It is used to restore the car to normal status after being stopped.
Monitor the Voice around the Car
This instruction is used to monitor the voice around the car. The SIM card
inside the system pays for the communication fee.
SMS command: 111111MON!
This instruction is used to monitor the voice around the car. The user’s
telephone pays for the communication fee.
SMS command: 111111MON:P1*
This instruction is used to program the phone number which is used for
carrying out direct monitoring or talking always.
User uses this phone number to call the tracker, it will be connected
automatically. By this way, user can monitor the voice freely.
Example: 111111MON:13922713571*
Note: If the phone is the same as the first alarm-received phone (111111*10
Mobile #1*20 Mobile #2*), the calling from this telephone can only be
arm/disarm the tracker.
x is the speed in KM/H , maximum value is 255M/H
Example: User uses the mobile 13780012345 to send 111111MON! to the
system, then use the mobile 13780012345 to call the tracker, it will be
connected automatically, and user can monitor the voice around.
Odometer
SMS command: 111111ODO:
It is used to read the present odometer
SMS command:111111ODO:X
it is used to set the basic value of odometer
To Next Page
Loading...
