LUBRICATION
TECHNICAL SPECIFICATIONS
INSTALL HYDRAULIC CONNECTIONS
Use only tools, hoses and accessories rated at 10,000 PSI
(700kg/cm
2
). Remove the shipping plugs from the ports
to connect your coupling(s) or hose(s) to manifold. Use
1.5 wraps of Teon tape (or suitable thread sealant) on all
threads, leaving the rst complete thread free of tape to
ensure no foreign matter enters the hydraulic circuit.
When making connections with quick disconnect couplings,
make sure the couplings are fully engaged. Threaded connec-
tions such as ttings, gauges, etc. must be securely tightened
and leak free.
EP500
EP1000
To Next Page
Loading...
