Tork 86ECO - Part Description with Replacement Instructions

Washroom Dispenser Service and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
Revision Date: 10-8-19
2 of6
Essity Internal
Essity Internal
Part Description with Replacement Instructions
Parts with SKUs listed are available for order from as of the revision date on the manual. Contact an
Essity Sales Rep or the Essity Quality Coordinator to order these parts.
If no SKU is listed, the availability of the part is unknown. Please contact the Essity Quality
Coordinator for more information (see Contacting
Essity
section).
Replacement SKU Description & Replacement Instructions
LOCKINSERT
LOCK FINGERS
Unmounting the dispenser is required to remove the lock fingers. Locate the
tabs that secure the lock fingers on the back of the dispenser. Bend the tabs to
a position in which the fingers can be removed.
LEFT HUB ARM
RIGHT HUB ARM
Unmounting the dispenser is required to remove the arms. Pinch the plastic
tabs on the back of the dispenser together while pulling arm from front.
Replacement arms can be snapped into place from the front of the dispenser.
86ECO COVER
86ECO COVER
Pull one side away from back until hinge pivot clears back. Then pull other side
pivot away from back and remove cover.
#14 KEY
#14 DISP KEY