What to do if the Tormatic Remote Control door reverses or does not close?
If the Tormatic Remote Control door reverses or does not close, it might be because the photoelectric sensor has triggered. To resolve this, check menu item 36.
Why does my Tormatic T100 R door only close with dead man's control?
If the Tormatic Remote Control door responds only to dead man's control for closing, it could be because the closing edge testing has failed. Check the closing edge safety device.
Why does my Tormatic T100 R experience brief operational interruptions?
If there is a brief operational interruption with the Tormatic Remote Control, it may be because the door movement exceeded the time value detected (90 sec). Check the door for ease of motion or blockage, and also check the end positions.
What should I do if the Tormatic Remote Control door doesn't open/close because the slack rope switch triggered?
If the Tormatic Remote Control door neither opens nor closes, and the slack rope switch has triggered, check the ropes.
Why won't my Tormatic T100 R door open or close, and the safety switch is triggered?
If the Tormatic Remote Control door neither opens nor closes and the safety switch has triggered, it may be due to a damaged connection line 8k2 strip or a triggered slack rope switch. Check the slack rope switch to resolve this.
What to do if Tormatic T100 R door doesn't open/close and safety input J4.3/4 is triggered?
If the Tormatic Remote Control door neither opens nor closes and the safety input J4.3/4 is triggered, check the status of the peripherals at J4.3/4.
Why is my Tormatic Remote Control door opening slowly?
If the Tormatic Remote Control door opens slowly, the anti-crash sensor may have been triggered. Check the door and door guide to resolve this issue.
How to fix a Tormatic T100 R door that neither opens nor closes?
If the Tormatic Remote Control door neither opens nor closes, it might be due to no door end position being programmed. To fix this, program the door end position under menu items 30 + 31.
Why does my Tormatic T100 R Remote Control door reverse or not close?
If your Tormatic Remote Control door reverses or does not close, it could be due to the closing edge being triggered. In this case, you should check menu item 35.
General| Brand | Tormatic |
|---|---|
| Model | T100 R |
| Category | Remote Control |
| Language | English |
To Next Page
