8
ELECTRICAL
This machine operates on a standard, 15 AMP, 115 volt AC circuit and has a grounded plug.* Make
sure the machine is connected to an outlet having the same configuration as the plug.
No ungrounded adapter should be used with this machine.
*Special voltage models available.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk electric shock. This machine is equipped
with a cord having an equipment -grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have
a proper outlet installed by a qualified electrician.
This machine is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated in sketch A. A temporary adapter that looks like the adapter illustrated in sketches B and C
may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded
outlet is not available. The temporary adapter should be used only until a qualified electrician can install
a properly grounded outlet (sketch A). The green-colored rigid tab, lug, or the like extending from the
adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical
Code.
SKETCH A SKETCH B SKETCH C
To Next Page
Loading...
Need help?
General
