Need help?Do you have a question about the tornos DECO 26a and is the answer not in the manual?
Explains safety symbols, risk levels, and provides crucial operational warnings.
Provides critical safety guidelines, warnings, and manufacturer disclaimers.
Details necessary safety measures and protective equipment for the machine.
Lists the key technical specifications and dimensions for the machine models.
Instructions on how to properly pack the lathe for shipment or relocation.
Step-by-step guide for safely removing the machine from its packaging.
Procedures for cleaning the machine after unpacking, including rust protection.
Overview of required floor space and layout diagrams for machine placement.
Guidance on selecting the optimal site for the machine installation.
Step-by-step instructions for removing all transport securing devices.
Procedures for securely anchoring the machine to the floor for stability.
Steps for securing movable parts of the lathe for transport.
Key electrical specifications and requirements for installation.
Guide to connecting the TORNOS autotransformer for power supply.
Requirements for air quality, pressure, and oil content for pneumatic systems.
General| Maximum drilling diameter | 10 mm |
|---|---|
| Maximum tapping diameter | M8 |
| Type | Swiss-type automatic lathe |
| Maximum machining diameter | 26 mm |
| Power supply | 400V, 50/60 Hz |
| Maximum bar capacity | 25.4 mm |
To Next Page
