tornos DECO 7/10 User Manual

DECO 7 / 10
DECO 7a / 10a
DECO 7e / 10e
OPTIONS
& ALLIED TOOLING
Δ ATTENTION !
Before handling / operating the machine,
read first the SAFETY REGULATIONS !
TORNOS SA
CH−2740 MOUTIER
http://www.tornos.ch
Printed in Switzerland
Copyright E 1999−2007
300236 en

tornos DECO 7/10 Specifications

General

Brand	tornos
Model	DECO 7/10
Category	Industrial Equipment
Language	English

Summary

1. Generalities

1.3 Differentiation of Degrees of Risk

Explains safety symbols indicating danger, warning, caution, attention, and prohibition.

1.4 Important Safety Indications

Provides crucial safety advice and disclaimers for machine operation and modifications.

2. (305009) Cross Drilling Attachment 1600

7. (242447) Attachment for Cutting Pinions by Generation

7.1 Inclination of the Equipment

Details on adjusting the equipment's angle for specific cutting operations.

7.2 Presetting

Procedures for setting up the attachment before operation.

8. Peripherals & Other Options

8.1 Tool Breakage

Information on sensors to detect tool breakage during machining.

8.1.1 Frontwork Tool Breakage Sensor 5120

Details on the frontwork tool breakage sensor and its function.

8.1.2 Backwork Tool Breakage Sensor

Information on the backwork tool breakage sensor.

8.2 (305069) Laser Sensor

Description and application of the laser sensor for tool detection.

8.3 Mist & Smoke Control

Details on the mist and smoke control unit for a cleaner working environment.

8.3.1 (305173) Mist & Smoke Control Unit FILTERMIST 5430

Specifics of the FILTERMIST unit for mist and smoke extraction.

8.4 FB 703 Fire Prevention Unit 5483

Information on the FB 703 Fire Prevention Unit for safety during machining.

8.4.1 Description

Defines the fire protection system as a safety device.

8.4.2 Application

Explains the equipment's use for protection against fire during specific material machining.

10. Customer-Interface Options

10.2 Programming Optional Socket 1

Instructions for programming optional socket 1.

10.2.1 Configurating Optional Socket 1

Steps to configure optional socket 1 via part program.

10.2.2 DO Signals for Configurating Option Socket 1

List of DO signals for configuring option socket 1 and their programming.

10.3 Programming Optional Socket 2

Instructions for programming optional socket 2.

10.3.1 Configurating Optional Socket 2

Steps to configure optional socket 2 via part program.

11. (305092) Milling / Slotting Attachment in T33 3700

12. 305096) Cross Drilling / Milling Attachment

13. (305107) Differential-Threading/Tapping Spindle for S1/S3 3620

14. (305112) Internal Thread Whirling on Backwork Gang (T41−T44) 4400

14.2 Centering Whirling Toolholder

Instructions for centering the whirling toolholder.

14.3 (305113) Pneumatic Coolant System for Internal Thread Whirling on Frontwork & Backwork Gangs

Details of the pneumatic coolant system for thread whirling.

15. (305112) Internal Thread Whirling on Frontwork Gang (T31−T33) 3800

15.1 Centering Whirling Attachment

Instructions for centering the whirling attachment.

15.2 (305113) Pneumatic Coolant System for Internal Thread Whirling on Frontwork & Backwork Gangs

Details of the pneumatic coolant system for thread whirling.

16. (305115) External Thread Whirling in T33 Position 3650

16.3 Setting Whirling Attachment

Procedures for setting the whirling attachment.

16.3.1 Parallelism and Centering

Steps for achieving parallelism and centering of the attachment.

16.3.2 Axial Alignment of Cutters

Instructions for aligning cutters axially.

16.3.3 External Thread Milling Tool System

Details of the external thread milling tool system.

17. (305124) Locking System for Oriented Main Spindle 0940

17.1 Programming the Mechanical Locking System.

Programming the mechanical locking system for the main spindle.

17.2 (306125) Locking Pneumatics for Oriented Main Spindle

Pneumatic system for locking the main spindle.

18. (305125) Locking System for Oriented Pickoff Spindle 4040

18.1 Programming the Mechanical Locking System.

Programming the mechanical locking system for the pickoff spindle.

18.2 (306125) Locking Pneumatics

Pneumatic system for locking the pickoff spindle.

18.3 (305185) Limiting Chucking Force Setting System Travel 4052

System for limiting chucking force setting and travel.

19. (305121) Bar Retention Claws 2900

20. Long Part Evacuation 4900

20.1 (305116) Long Part Ejector

Details of the long part ejector system.

20.2 (305128) Long Part Catcher

Description of the long part catcher system.

20.3 (305130) Long Part Evacuation Pneumatics

Pneumatic operation for long part evacuation.