tornos DECO 7/10 - Enable Input Check-Function Inside Program Loop; Enable; Disable Outputs on Optional Socket 1

OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 10.2.4 /4
10.2.3Enable Input Check-Function Inside Program Loop
M815 enables check start,
generates 100 ms impulse to enable
check function of inputs on Socket 1.
Note:
Alarms Class 1 and 3 change over to Alarms Class 4 after 10 minutes
and cut off the power to the machine.
10.2.4Enable / Disable Outputs on Optional Socket 1
M811: enables Output 1.
M812: disables Output 1.
DO 1761=1: disables Output 1 over RESET key.
Programming: M800 P1=1761
DO 1765=1: disables Output 1.
Programming: M800 P1=1765
M813: enables Output 2.
M814: disables Output 2.
DO 1762=1: disables Output 2 over RESET key.
Programming: M800 P1=1762
DO 1766=1: disables Output 2.
Programming: M800 P1=1766