tornos DECO 7/10 - 305049) Spacers 1610

OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 2.1 /2
2.1 (305049) SPACERS 1610
DESCRIPTION
Each standard machine is equipped with a set of spacers (3 x 2 mm, 2 x 3 mm,
1 x 5 mm, 1x 10 mm), for the tool offsetting in Z.
TECHNICAL DATA
TB Ident. No. Thickness No. spacers in a set for Options
561065 2 mm 3 1001, 1002, 1600
466692 3 mm 2 1600
561066 5 mm 1 1600
561067 10 mm 1 1600
Is used for DECO 2000 functions: (each tool can receive 1 spacer)
>>>