OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 8.4.3 /9
8.4 FB 703 FIRE PREVENTION UNIT 5483
8.4.1 Description
The fire protection system is defined as being a safety device.
8.4.2 Application
This equipment for protection against fire makes it possible to contain an out-
break of fire during machining of materials likely to cause risks of inflammation,
for example:
− machining of titanium, magnesium,
− machining of stainless steel,...
8.4.3 Instructions and documents
A general description and details of mounting, operation, maintenance and
troubleshooting are given in maker’s instructions supplied with the equipment
in 5 languages.
The specifications concerning manipulation, conditions for operation and
safety are contained therein.
Δ Danger !
Unauthorized manipulation of the machine’s fire protection system can
diminish the working capacity of the system and/or cause harm to per-
sons and cause material damage.
. Caution!
Read and follow the manufacturer’s warning instructions.
Δ Warning!
All oil mist extraction systems or fume filters (options 5430 to 5434)
must without fail be equipped with a shutting−off system compatible with
the fire prevention device (non−return valve or motor brake connected to
the emergency stop of the machine, this being the responsibility of the
purchaser if installed by the latter).
TORNOS SA supplies compatible systems.
To Next Page
Loading...
