OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 22.1 /1
22. INDEX
22.1 INDEX: OPTIONS
0940, (305124) Locking System for Oriented Main Spindle, Chap. 17. /1
1600, (305009) cross drilling attachment, Chap. 2. /1
1610, (305049) spacers, Chap. 2.1 /2
1700, (305058) RADIAL polygoning attachment, Chap. 3. /1
1800, (305066) slotting attachment for 30−50mm−od cutters, Chap. 4. /1
2900, (305121) bar retention claws, Chap. 19. /1
3100, (305054) fIXED spindle for esx 12 collets, Chap. 5.1 /1
3115, (305143) Fixed spindle FOR WJ8 COLLETS (WATCH INDUSTRY), Chap. 5.2 /3
3600, (305006) live spindle for esx 12 collets, Chap. 5.3 /5
3610, (305102) LONG POWERED SPINDLE, Chap. 5.4 /7
3620, (305107) DIFFERENTIAL−THREADING/Tapping spindle for S1/S3, Chap. 13.3 /1
3650, (305115) external thread whirling in t33 position, Chap. 16. /1
3700, (305092) milling / slotting attachment in t33, Chap. 11. /1
3800, (305112) INTERNAL THREAD WHIRLING on frontwork gang (t31−t33), Chap. 15. /1
4040, (305125) Locking System for Oriented Pickoff Spindle, Chap. 18. /1
4052, (305185) LIMITING CHUCKING FORCE SETTING SYSTEM TRAVEL, Chap. 18.3 /9
4060, (305086) OIL INJECTOr for collet rinsing, Chap. 9. /1
4400, (305112) INTERNAL THREAD WHIRLING on Backwork gang (t41−t44), Chap. 14.1 /1
4700, (305056) slotting attachment for backworking, Chap. 6.1 /3
To Next Page
Loading...
