OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 1.4 /2
1.3 DIFFERENTIATION OF DEGREES OF RISK
These instructions indicate a number of safety measure symbols which
appear also on the machine and are intended to protect the user, his/her
effects and the environment from injuries and damage as applicable.
Below, you will find the safety symbols, their headings and definitions. Please,
read these first before you continue.
Δ Danger !
indicates a direct danger of death or serious injury.
Δ Warning !
indicates an object or action which may cause death or serious
injury.
Δ Caution !
indicates an object or action which may cause injury or serious
damage.
. Attention !
indicates incorrect actions or such that may cause damage.
⊗ Prohibition !
indicates an action or operation prohibited because of evident or
alleged hazards.
⇒ Info :
Gives information or comment related to safety.
Note :
Gives information unrelated to safety
1.4 IMPORTANT SAFETY INDICATIONS
Δ Warning !
Read the instruction before operating the machine.
Should the user disregard the instructions of this manual, TORNOS SA
declines any liability whatsoever.
. Attention !
Certain maintenance works are absolutely necessary to ensure good
operation of the machine. They are given in the MAINTENANCE
SCHEDULE on the machine
(or see Instructions: OPERATION-MAINTENANCE).
. Attention !
TORNOS SA disclaims all responsibility for any modifications carried
out by the customer to the machine, and to its related equipment and
software, without agreement ratified by TORNOS SA.
To Next Page
Loading...
