Toro 03678 - Adjusting the Rear Wheel Toe-In

g004147
Figure57
1.Locknut2.Tractionadjustmentcam
WARNING
Theenginemustberunningsothenal
adjustmentofthetractionadjustment
camcanbeperformed.Thiscouldcause
personalinjury.
Keepyourhands,feet,face,andother
bodypartsawayfromthemufer,other
hotpartsoftheengine,andanyrotating
parts.
4.Starttheengineandrotatethecamhexineither
directionuntilthewheelsceaserotation.
5.Tightenthelocknuttosecuretheadjustment.
6.Shutofftheengine.Removethejackstands
andlowerthemachinetotheshopoor.
7.Testdrivethemachinetomakesureitdoesnot
creep.
AdjustingtheRearWheel
Toe-in
1.Rotatethesteeringwheelsothattherear
wheelsarestraightahead.
2.Loosenthejamnutoneachendofthetierod
(Figure58).
Note:Theendofthetierodwiththeexternal
grooveisalefthandthread.
g004136
Figure58
1.Jamnut3.Wrenchslot
2.Tierod
3.Usingthewrenchslot,rotatethetierod
4.Measurethedistanceatthefrontandrearofthe
rearwheelsataxleheight.Thedistanceatthe
frontoftherearwheelsshouldbelessthan6
mm(1/4inch)ofthedistancemeasuredatthe
rearofthewheels.
5.Repeatprocedureasrequired.
42