Toro 03678 - Page 29

SettingtheServiceDueTimer
Theserviceduetimerresetstheservicedue
hoursafterascheduledmaintenanceprocedureis
performed.
1.IntheSettingsMenu,usethecenterbuttonto
scrolldowntothePROTECTEDMENUandpress
therightbutton.
2.EnterPIN;refertoAccessingProtectedMenus
ontheOperator’sManualforyourmachine.
3.IntheServiceMenu,navigatetotheHOURS
MENU.
4.Scrolldowntotheservicesymbol.
Note:Ifserviceiscurrentlydue,thersticon
showsNOW.
5.Belowthersticonistheserviceintervalitem
(timeinterval,e.g.250,500,etc.)
Note:Serviceintervalisaprotectedmenuitem.
6.Highlighttheserviceintervalandpresstheright
button.
7.Whenthenewscreenappears,conrmRESET
SERVICEHOURS—AREYOUSURE?
8.SelectYES(centerbutton)orNO(leftbutton).
9.AfteryouselectYEStheintervalscreenclears,
andrevertsbacktotheServiceHoursselections.
SettingtheBladeCount
1.IntheSettingsMenu,scrolldowntoBlade
Count.
2.Presstherightbuttontochangethebladecount
between5,8,or11bladereels.
SettingtheMowSpeed
1.IntheSettingsMenu,scrolldowntoMowSpeed.
2.Presstherightbuttontoselectmowspeed.
3.Usethemiddleandrightbuttonstoselectthe
appropriatemowspeedsetonthemechanical
mow-speedlimiteronthetractionpedal.
4.Presstheleftbuttontoexitmowspeedandsave
thesetting.
SettingtheHeightofCut(HOC)
1.IntheSettingsMenu,scrolldowntoHOC.
2.PresstherightbuttontoselectHOC.
3.Usethemiddleandrightbuttonstoselectthe
appropriateHOCsetting.(Iftheexactsettingis
notdisplayed,selectthenearestHOCsetting
fromthelistdisplayed).
4.PresstheleftbuttontoexitHOCandsavethe
setting.
SettingtheFrontandRearReel
Speeds
Althoughthefrontandrearreelspeedsarecalculated
byinputtingthenumberofblades,mowspeedand
HOCintotheInfoCenter,thesettingcanbemanually
changedtoaccommodatefordifferentmowing
conditions.
1.T ochangetheReelSpeedSettings,scrolldown
totheFReelRPM,RReelRPM,orboth.
2.Presstherightbuttontochangethereelspeed
value.Asyouchangethespeedsetting,the
displaycontinuestoshowthecalculatedreel
speedbasedonbladecount,mowspeedand
HOC,whichwaspreviouslyentered,butthe
newvalueisalsodisplayed.
29