Toro 03678 - Hydraulic Fluid Capacity; Changing the Hydraulic Fluid

g376340
Figure103
1.Returnlter
2.Filterhead
3.Removethelter.
4.Wipecleantheltermountingareaofthelter
head.
5.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewreturnlter.
6.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
ChangingtheChargeFilter
1.Preparethemachineformaintenance;referto
PreparingforMaintenance(page40).
2.Tilttheseat;refertoTiltingtheSeat(page41).
3.Attheleftsideofthemachine,alignadrainpan
underthechargelter(Figure104).
g376339
Figure104
1.Filterhead
2.Chargelter
4.Removethelter.
5.Wipecleantheltermountingareaofthelter
head.
6.Applyathincoatofthespeciedhydraulicuid
tothegasketofthenewchargelter.
7.Threadthelterontothelterheadbyhanduntil
thegasketcontactsthemountingsurface,then
rotatethelteranadditional1/2turn.
8.Lowerandlatchtheseat;refertoLoweringthe
Seat(page41).
CheckingforLeaks
1.Starttheengineandrunitfor2minutestopurge
airfromthehydraulicsystem.
2.Shutofftheengine,removethekey,andcheck
forleaksatthereturnandchargelters.
Note:Repairallhydraulicleaks.
HydraulicFluidCapacity
34L(9USgallons);refertoHydraulicFluid
Specications(page58)
ChangingtheHydraulic
Fluid
ServiceInterval:Every2,000hours—Ifyou
areusingtherecommended
hydraulicuid,changethe
hydraulicuid.
Every800hours—Ifyouarenotusingthe
recommendedhydraulicuidorhaveever
60