Toro 04052TE - 2 Installing the Transport Wheels; 3 Checking Fluid Levels; 4 Adjusting the Cutting Unit

Figure3
1.Handleend
4.Securethehandleendstothemountingpinswiththe
bolts,washers,andlockwasherspreviouslyremoved
(Figure3).
5.Securethecablestothehandlewithcableties.
AdjustingtheHandle
1.Removethehairpincottersfromtheringpinson
eachsideofthemower(Figure2).
2.Whilesupportingthehandle,removetheringpins
fromeachsideandraiseorlowerthehandletothe
desiredoperatingposition(Figure2).
3.Installtheringpinsandhairpincotters.
2
InstallingtheTransport
Wheels(Optional)
Partsneededforthisprocedure:
2
Transportwheels(obtainseparately)
Procedure
1.Pushthekickstanddownwithyourfootandpull
uponthehandletosupportthemoweronthekick
stand.
2.ApplyNever–Seeztotheexposedendsoftheaxles
andslidethewheelontotheaxle(Figure4).
3.Pivotthewheellockingclipawayfromcenterof
thewheelallowingittoslidefartherontotheaxle
(Figure4).
Figure4
1.Lockingclip
4.Rotatewheelbackandforthuntilitslidescompletely
ontoaxleandlockingclipissecuredingrooveon
axleshaft.
5.Repeatprocedureonoppositesideofmachine.
6.Inatethetiresto12to15psi.(574to718Pa).
3
CheckingFluidLevels
NoPartsRequired
Procedure
1.Checktheengineoillevel,refertoCheckingthe
EngineOilLevelinEngineMaintenance.
2.Checkthetransmissionuidlevel,refertoChecking
theTransmissionFluidLevelinDriveSystem
Maintenance.
10