Toro 08120 - Operation; Controlling Fan Speed and Temperature; Maintenance; Servicing the Heater Air Filter

Operation
Operating the Fan
The fan has 4 speeds ( O FF , L OW , M EDIUM , and H IGH ).
Rotate the fan-control knob to regulate the speed of
the fan.
Rotate the temperature-control knob to regulate the
air temperature in the cab.
Maintenance
Servicing the Heater Air
Filter
Service Interval : Every 250 hours —Change the
heater air lter (more frequently in
dusty or dirty conditions).
Note: The heater air lter is designed to keep the
cabin air clean.
1. Remove the lter access cover from the heater
box assembly ( Figure 25 ).
g41 1877
Figure 25
1. Filter access cover
2. Gently remove the lter from the heater box
assembly .
Note: Do not attempt to clean the lter .
3. Inspect the new lter for damage by looking
into the lter while shining a bright light on the
outside of the lter .
Note: Holes in the lter appear as bright
spots. Inspect the element for tears, an oily
lm, or damage to the rubber seal. If the lter is
damaged, do not use it.
Note: Use care when handling the lter to avoid
damaging or deforming it.
4. Carefully install the lter .
5. Install the lter access cover on the heater box
assembly with the corresponding hardware.
Cleaning the Heater
Important: Do not get the heater box or heater
components wet.
15