Toro 12004TC Twister 1600 - 5 Installing the Hitch; 6 Installing the Cargo Box

Step
5
Installing the Hitch
Parts needed for this step:
1
Hitch
Procedure
1. R emo v e the 4 bolts and n uts from the inside
rear of the frame .
2. Align the hitc h with the mounting holes on the
frame . Secure the hitc h with the screws and
n uts ( Figure 7 ).
Figure 7
1. Hitch
Step
6
Installing the Cargo Box
Parts needed for this step:
1
Cargo box
1
Right-hand pivot bracket
1
Left-hand pivot bracket
4
Flange head screw (3/8 x 1 inch)
1
Bolt (5/16 x 3/4 inch)
1
Flange nut (5/16 inch)
Procedure
1. P osition the carg o bo x onto the frame . T he
carg o bo x m ust la y flat and be centered.
2. Mount the left hand pi v ot brac k et to the left
rear cor ner of the frame with 2 flang e head
screws (3/8 x 1 inc h). P osition the brac k et as
sho wn in Figure 8 .
Figure 8
1. Pivot bracket
3. Slide the carg o bo x mounting hole onto the
pi v ot brac k et ( Figure 9 ).
13