Toro 12004TC - Installing the Wheels; Installing the Steering Wheel

1
InstallingtheWheels
Partsneededforthisprocedure:
4Wheelassembly
Procedure
1.Removethefastenerssecuringthewheels.
2.Removetheshippingbracketsecuredtothewheel
studs.
3.Mountthewheelswiththepreviouslyremoved
fasteners(Figure3)andtorqueto45-65ft-lb
(61-88N-m).
Figure3
1.Wheelassembly
3.Wheelstud(rearwheel
hubshown)
2.Wheelnut
2
InstallingtheSteeringWheel
Partsneededforthisprocedure:
1
Steeringwheel
Procedure
1.Removethenutandwasherfromthesteeringshaft.
2.Slidethesteeringwheelandwasherontotheshaft.
Positionthesteeringwheelontheshaftsothatthe
crossbeamishorizontalwhenthetiresarepointed
straightaheadandthethickerspokeofthesteering
wheelisdownward.
3.Securethesteeringwheeltotheshaftwiththenut
(Figure4).Torquethenutto18-22ft-lb(24-29N-m)
Figure4
1.Steeringwheel
3.Washer
2.Nut4.Foamseal
11