Installing the Handle
Retainer
1. Remove the existing shoulder screw that
secures the left pod the machine ( Figure 6 ).
g465175
Figure 6
1. Existing shoulder screw
2. Left pod
2. Align the handle retainer to the left pod as shown
in Figure 7 .
g465176
Figure 7
1. Shoulder screw (1/4 x 1/2
inch)
2. Retainer
3. Secure the retainer to the pod ( Figure 7 ) with
the shoulder screw (1/4 x 1/2 inch) from the kit.
4
To Next Page
Loading...
