Toro 1800 Power Curve Set-Up/Assembly

1800 POWER CURVE
4 Service Instruction TSN0001a
11. Install and tighten the nut securing the LH side (Fig.
013).
12. If the wiring blocks the hole on the RH handle, use
a blunt end punch to route the wiring away from the
aligned holes (Fig. 014 and Fig. 015).
Fig. 013 PICT-1456
Fig. 014 PICT-1459
Fig. 015 PICT-1463

Toro 1800 Power Curve Specifications

General

Type	Electric Snow Blower
Power Source	Corded Electric
Clearing Width	18 inches
Intake Height	12 inches
Throw Distance	25 feet
Weight	25 lbs (11.3 kg)