Toro 20056 - Using the Self-propel Drive; Stopping the Engine

Figure 24
• T ur n the ignition k ey to the R un position and pull
the recoil star ter in the operating position ( Figure
25 ).
Figure 25
• T ur n the ignition k ey to the R un position and pull
the recoil star ter at the engine ( Figure 26 ).
Figure 26
3. If the mo w er does not star t in 1 or 2 pulls (or 5 seconds
using the electric star ter), press the primer button 1 or 2
times and tr y star ting it ag ain.
Note: If the mo w er still does not star t, contact an
A uthorized Ser vice Dealer .
Using the Self-propel Drive
T o operate the self-propel dri v e , simply w alk with y our
hands on the upper handle and y our elbo ws at y our sides ,
and the mo w er will automatically k ee p pace with y ou
( Figure 27 ).
Note: Y ou can self-propel the mo w er with the blade
eng ag ed or diseng ag ed.
Figure 27
Stopping the Engine
Model 20056 onl y
1. Push the ignition tog gle switc h to the Stop position
( Figure 28 ).
Figure 28
1. Ignition toggle switch
2. W hen the engine stops , remo v e the ignition k ey when
y ou lea v e the mo w er .
Stopping the Engine
Model 20058 onl y
1. T ur n the k ey to the Off position ( Figure 29 ).
11