Toro 20016 User Manual

Form No. 3354-611 Rev A
22in Recycler® Lawn Mower
Model No. 20016 —Serial No. 260000001 and Up
Operator's Manual
Introduction
R ead this infor mation carefully to lear n ho w to operate and
maintain y our product properly and to a v oid injur y and
product damag e . Y ou are responsible for operating the
product properly and safely .
Y ou ma y contact T oro directly at www .T oro .com for
product and accessor y infor mation, help finding a dealer ,
or to register y our product.
W henev er y ou need ser vice , g en uine T oro par ts , or
additional infor mation, contact an A uthorized Ser vice
Dealer or T oro Customer Ser vice and ha v e the model and
serial n umbers of y our product ready . Figure 1 identifies the
location of the model and serial n umbers on the product.
Figure 1
1. Model and serial number plate
W rite the product model and serial n umbers in the space
belo w:
Model No.
Serial No.
T his man ual identifies potential hazards and has safety
messag es identified b y the safety aler t symbol ( Figure 2 ),
whic h signals a hazard that ma y cause serious injur y or
death if y ou do not follo w the recommended precautions .
Figure 2
1. Safety alert symbol
T his man ual uses tw o w ords to highlight infor mation.
Impor tant calls attention to special mec hanical infor mation
and Note emphasizes g eneral infor mation w or th y of special
attention.
Warning
CALIFORNIA
Pr oposition 65 W ar ning
T he engine exhaust fr om this pr oduct contains
chemicals kno wn to the State of Calif or nia to cause
cancer , bir th defects, or other r epr oducti v e har m.
Important: T his engine is not equipped with a
spar k ar r ester muf fler . It is a violation of Calif or nia
Public R esource Code Section 4442 to use or operate
the engine on an y f or est-co v er ed, br ush-co v er ed, or
g rass-co v er ed land. Other states or federal ar eas may
ha v e similar la ws.
T his spark ignition system complies with Canadian
ICES-002
T he enclosed Engine Owner’ s Man ual is supplied
f or inf or mation r egarding the US En vir onmental
Pr otection Agency (EP A) and the Calif or nia Emission
Contr ol R egulation of emission systems, maintenance,
and w ar ranty . R eplacements may be order ed thr ough
the engine man uf actur er .
F or models with stated engine horse po w er , the g ross
horse po w er of the engine w as laborator y rated b y the engine
man ufacturer in accordance with SAE J1940. As configured
to meet safety , emission, and operating requirements , the
actual engine horse po w er on this class of la wn mo w er will
be significantly lo w er .
Safety
T his la wn mo w er meets or ex ceeds the CPSC blade safety
requirements for w alk-behind rotar y la wn mo w ers and the
B71.1 specifications of the American National Standards
Institute in effect at the time of production.
R ead and under stand the contents of this man ual
bef or e y ou star t the engine.
T he safety aler t symbol ( Figure 2 ) is used to aler t y ou to
potential personal injur y hazards . Obey all safety messag es
that follo w this symbol to a v oid possible injur y or death.
Improperly using or maintaining this mo w er could result in
injur y or death. T o reduce this potential, comply with the
follo wing safety instr uctions .
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved

Toro 20016 Specifications

General

Engine	Briggs & Stratton
Deck Material	Steel
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge	Yes
Engine Type	4-Cycle
Cutting Width	22 inches
Cutting Height	1 - 4 in (2.5 - 10 cm)
Power Source	Gas
Wheel Size	7 in (front)

Summary

Introduction and Warnings

California Proposition 65 Warning

Engine exhaust contains chemicals known to cause cancer, birth defects, or other reproductive harm.

Safety Alert Symbol and Information

Identifies potential hazards and emphasizes important safety messages and information.

General Operation and Safety

Safe Operation Practices

Covers essential rules for safe operation, including keeping clear of moving parts and bystanders.

Slope Operation Safety

Guidelines for safely mowing on slopes, emphasizing caution and proper technique.

Children Safety Precautions

Ensures children's safety by keeping them away from the mower and being alert.

Safe Gasoline Handling

Provides critical safety instructions for handling flammable gasoline to prevent fires or explosions.

General Service and Decals

Safety and Instructional Decals

Importance of safety and instruction decals and replacing damaged ones.

Maintaining Safe Working Condition

Covers checks for tightness, safety devices, debris, foreign objects, and blade condition.

Setup Procedures

Unfolding the Handle Safely

Instructions for unfolding the handle, including safety precautions for cables.

Filling the Engine with Oil

Guidance on checking and filling the engine oil level with the correct type and amount.

Product Overview and Operation Basics

Product Identification

Visual guide to identify product parts and accessories.

Fueling the Lawn Mower

Instructions and safety precautions for filling the fuel tank with gasoline.

Checking Engine Oil Level

Procedure for checking the engine oil level using the dipstick.

Adjusting Mower Settings

Adjusting Cutting Height Safely

Steps and safety warnings for adjusting the cutting height of the mower.

Cutting Height Settings Guide

Illustrates the different cutting height positions available for the mower.

Adjusting Handle Height

Procedure for adjusting the mower's handle height for user comfort.

Starting, Stopping, and Clipping Management

Starting the Engine

Step-by-step guide on how to start the mower's engine.

Using the Self-propel Drive

Instructions on engaging and operating the mower's self-propel feature.

Stopping the Engine

Procedure for safely stopping the mower's engine and blade.

Recycling Clippings

Information on preparing the mower for recycling grass clippings.

Clipping Discharge Options

Bagging the Clippings

Instructions for installing and removing the grass bag for collecting clippings.

Side-discharging Clippings

Guidance on using the side discharge for tall grass, including safety notes.

Installing the Side Discharge Chute

Steps for installing the side discharge chute onto the mower.

Operating Tips and Techniques

General Mowing Tips

General advice for optimal mowing performance and safety.

Cutting Grass Techniques

Methods for cutting grass effectively, including height adjustments and mowing patterns.

Cutting Leaves Guide

Recommendations for mowing leaves to ensure proper collection and lawn health.

Maintenance Procedures

Recommended Maintenance Schedule

Outlines recommended maintenance tasks based on service intervals.

Preparing for Maintenance

Essential steps before performing maintenance, including safety warnings.

Tipping Mower Safety

Critical safety warning about fuel leaks when tipping the mower.

Replacing the Air Filter

Procedure for replacing the air filter for optimal engine performance.

Engine and Blade Maintenance

Changing the Engine Oil

Detailed steps for draining and refilling the engine oil.

Lubricating Wheel Gears

Instructions for lubricating the mower's wheel gears.

Replacing the Blade

Procedure for safely replacing the mower blade, including torque specifications.

Cleaning and Storage

Cleaning the Mower Safely

Guidelines for cleaning the mower, including safety precautions.

Preparing Mower for Storage

Steps to prepare the mower for long-term storage, including fuel treatment.

Folding Handle for Storage

Instructions on how to fold the mower handle for convenient storage.

Handle Folding and Storage Removal

Handle Folding Procedure and Safety

Detailed steps for folding the handle, emphasizing cable routing and safety.

Removing Mower from Storage

Steps to prepare the mower for use after it has been in storage.