Toro 20016 - Handle Folding and Storage Removal; Handle Folding Procedure and Safety; Removing Mower from Storage

1. Loosen the handle knobs until y ou can mo v e the upper
handle freely ( Figure 35 ).
Figure 35
2. F old the upper handle forw ard as sho wn in Figure 36 .
Important: R oute the ca bles to the outside of the
handle knobs as y ou f old the upper handle.
Figure 36
3. T o unfold the handle , rev erse the ste ps abo v e .
Removing the Mower from
Storage
1. R emo v e the spark plug and spin the engine rapidly using
the star ter to blo w the ex cess oil from the cylinder .
2. Install the spark plug and tighten it with a tor que
wrenc h to 15 ft-lb (20 N ⋅ m).
3. Connect the wire to the spark plug .
13