Toro 20056 - Removing the Grass Bag; Side-Discharging the Clippings; Installing the Side Discharge Chute

Figure 35
2. R emo v e the rear disc harg e plug ( Figure 35 ).
3. R oute the star ter rope around the lo w er rope guide
( Figure 36 ).
Figure 36
Note: T he lo w er rope guide releases the star ter rope
when y ou pull the recoil star t handle .
4. Install the bag onto the door rod ( Figure 37 ).
Figure 37
5. Lo w er the rear door ( Figure 38 ).
Figure 38
Removing the Grass Bag
T o remo v e the bag, rev erse the ste ps abo v e .
Side-discharging the Clippings
Use the side disc harg e for cutting v er y tall g rass .
If the bag is on the mo w er , remo v e it and inser t the rear
disc harg e plug (refer to R emo ving the Grass Bag) before
side-disc harging the clippings .
Important: Ensur e that the r ear discharge plug is in
place bef or e y ou r ecy cle the clippings ( Figur e 39 ).
Figure 39
T he blade is shar p; contacting the blade can r esult
in serious per sonal injur y .
Stop the engine and w ait f or all mo ving par ts to stop
bef or e lea ving the operating position.
Installing the Side Discharge Chute
1. Unloc k the side disc harg e door ( Figure 40 ).
14