Toro 20090 - Starting the Engine; Adjusting the Handle Height; Using the Self-Propel Drive

Note:Toraisethemower,moveall4cuttingheight
leversforward;tolowerthemower,movethemall
rearward(Figure11).
Figure11
AdjustingtheHandleHeight
Youmayraiseorlowerthehandletoaposition
comfortableforyou.
Rotatethehandlelock,movethehandletooneofthree
positions,andlockthehandleintoposition(Figure12).
Figure12
1.Handlelock2.Handlepositions
StartingtheEngine
1.Pullthebladecontrolbartothehandle(Figure13).
Figure13
1.Hand-pushmodelsonly
2.Self-propelmodelsonly
2.Pulltherecoilstarthandle(Figure14).
Figure14
1.Hand-pushmodelsonly
2.Self-propelmodelsonly
Note:Ifthemowerdoesnotstart,contactan
AuthorizedServiceDealer.
UsingtheSelf-propelDrive
Self-propelmodelsonly
Tooperatetheself-propeldrive,simplywalkwithyour
handsontheupperhandleandyourelbowsatyour
sides,andthemowerwillautomaticallykeeppacewith
you(Figure15).
Figure15
8